Job Description :

Experience in electromechanical product development including solenoids, valves, and actuators. The ideal candidate will be responsible for electromagnetic simulation, magnetic circuit design, and functional validation of electrical sub-systems integrated into our advanced product range. This role is crucial in achieving OEM-level reliability, performance, and certification standards.

Job Requirements :

Job Summary:

We are looking for a highly skilled and innovative Electrical Design Engineer with hands on experience in electromechanical product development including solenoids, valves, and actuators. The ideal candidate will be responsible for electromagnetic simulation, magnetic circuit design, and functional validation of electrical sub-systems integrated into our advanced product range. This role is crucial in achieving OEM-level reliability, performance, and certification standards.

Key Responsibilities:

• Design and develop electrical and electromagnetic systems for solenoids, valves, and electromechanical actuators.
• Perform electromagnetic simulations using tools like FEMM, Ansys Maxwell, or COMSOL Multiphysics.
• Define electrical circuit schematics, including driver circuits, sensing systems, and interface logic.
• Collaborate with mechanical and electronics teams to optimize electro-mechanical performance and design integration.
• Conduct thermal analysis, magnetic flux optimization, inductance balancing, and current density evaluation.
• Specify coil winding parameters (turns, gauge, insulation) and validate through simulation and prototype testing.
• Support design validation through lab testing, endurance testing, and field trials.
• Work with vendors for the development of custom coils, PCBs, and driver modules.
• Lead efforts in achieving electrical product certifications: CE, UL, RoHS, EMC compliance, etc.
• Provide inputs for design for manufacturing (DFM), tooling feasibility, and coil over molding techniques.
• Evaluate and approve electrical BOM, source alternatives, and coordinate with sourcing/procurement teams.
• Drive continuous improvement and contribute to innovation programs for new product platforms.

Mandatory Skills & Competencies:

• Strong proficiency in electromagnetic simulation tools such as FEMM, Ansys Maxwell.
• Hands-on experience in coil design, magnetic analysis, and optimization techniques.
• Deep knowledge of electrical solenoid design , magnetic circuit design, signal conditioning, PCB layout, and EMI/EMC considerations.
• Familiarity with electromechanical interfaces, contact resistance, and insulation degradation mechanisms.
• Understanding of solenoid activation principles – DC, AC, PWM actuation, latching behavior.
• Experience in OEM-level product design and lifecycle management.
• Exposure to safety, functional reliability, and IP-grade protection for coil-based systems.
• Proficient in reading technical drawings, interpreting GD&T, and working with cross-functional teams.
• Strong analytical and troubleshooting skills with hands-on experience in lab testing.
• Excellent written and verbal communication, including technical documentation and review reports.

Preferred Attributes:

• Working knowledge of embedded control systems or collaboration with firmware teams.
• Exposure to wire harness design, connector selection, overvoltage/ESD protection.
• Experience in automotive, industrial automation, or fluid control applications.
• Experience in using FEMM, Ansys - Maxwell, Multisim, Proteus,MATlab , LTspice, or equivalent tools for circuit-level validation.
• Familiarity with quality tools like DFMEA, Fishbone Analysis, Root Cause Analysis.

Minimum Requirements :

B.E/B.Tech in EEE/ECE with 6 to 8 years of experience in Electromechanical products

Number of Position : 1

Contact Person : Talent Acquisition Team

Phone : 9952890877

Job Location : Coimbatore (Malumichampatti)

Interview Date & Time : On Appointment (F2F only)

Apply

Job Description :

Highly skilled and innovative Electronics Design Engineer with a strong background in sensor technology, embedded electronics, and analog / digital circuit design for electromechanical products including solenoids and valves. The ideal candidate will lead the development of OEM-grade sensor solutions such as reed switches, pressure, temperature, humidity sensors, and control electronics including PWM drivers and proportional control systems.

Job Requirements :

Job Summary:

We are seeking a highly skilled and innovative Electronics Design Engineer with a strong background in sensor technology, embedded electronics, and analog/digital circuit design for electromechanical products including solenoids and valves. The ideal candidate will lead the development of OEM-grade sensor solutions such as reed switches, pressure, temperature, humidity sensors, and control electronics including PWM drivers and proportional control systems.

Key Responsibilities:

• Lead the design and development of embedded electronic circuits and PCBs for sensor-integrated electromechanical products.
• Develop custom sensor-based solutions including PWM circuits, Remote control Circuits, PID control circuits, Motor controller for Servo motors, PMDC motors, reed switch sensors, pressure sensors, temperature sensors, thermocouples, and humidity sensors.
• Design and validate PWM-based coil driver circuits, proportional solenoid control systems, Motor Driver Circuits, Embedded Circuits and signal conditioning circuits & sensors.
• Create and manage multi-layer PCB designs using industry-standard tools (Altium, Eagle, KiCad, etc.).
• Perform analog and digital circuit simulations using tools like LTspice, Multisim, or PSpice.
• Define circuit specifications, sensor calibration logic, and EMI/EMC compliance strategy.
• Program embedded circuits for firmware integration and hardware-software co-design.
• Coordinate with mechanical, electrical, and product certification teams for robust end-to-end integration.
• Develop and manage documentation for design files, BOMs, Gerbers, schematics, test procedures, and validation reports.
• Support PCB prototyping, assembly, testing, and debugging.
• Interface with PCB manufacturers and EMS vendors for productionization and quality assurance.
• Participate in product certification processes – CE, RoHS, REACH, EMC, IP65/67 ratings for electronics.
• Conduct DFMEA, root cause analysis, and product performance validation under real-world conditions.
• Mentor junior engineers and contribute to R&D knowledge sharing and patentable innovations.

Mandatory Skills & Competencies:

• Proficient in sensor circuit design, low power electronics, and signal conditioning techniques.
• Deep knowledge of reed switch-based sensing, Hall sensors, thermocouple interfacing, RTD circuits, pressure transducers, and humidity measurement principles.
• Hands-on experience with PWM control circuits, proportional valve driver circuits, and coil actuation logic.
• Strong expertise in PCB CAD tools – Altium Designer, Eagle, KiCad, or OrCAD.
• Familiar with DFM/DFT principles, PCB stack-up, thermal layout considerations and component derating.
• Practical exposure to EMI/EMC standards, surge protection, and PCB shielding strategies.
• OEM-level design capabilities for reliability, durability, and compactness.
• Knowledge of safety-critical design, reverse polarity protection, and ESD suppression.
• Strong debugging skills using oscilloscope, logic analyser, multimeter, LCR meter, and simulation tools.
• Experience in working with cross-functional teams for end-to-end product development.

Preferred Attributes:

• Experience with CAN, UART, I2C, SPI protocols for sensor communication.
• Familiarity with microcontroller selection and integration (e.g., STM32, MSP430, PIC).
• Knowledge of IoT-ready sensor platforms and BLE/wireless communication modules.
• Involvement in designing for rugged industrial environments with high temperature and vibration tolerance.
• Exposure to modular design, interface standardization, and scalable sensor platforms.
• Ability to lead proof of concept (PoC) and new technology evaluation projects.

Minimum Requirements :

B.E/B.Tech or M.E/M.Tech in EEE/ECE with 6 to 8 years of experience in Electromechanical products

Number of Position : 1

Contact Person : Talent Acquisition Team

Phone : 9952890877

Job Location : Coimbatore (Malumichampatti)

Interview Date & Time : On Appointment (F2F only)

Apply

Job Description :

Hands-on experience in electromechanical product design such as solenoids, valves, and actuators, to join our dynamic team. This role demands a high level of innovation, deep design knowledge, and comprehensive understanding of product manufacturing processes. The ideal candidate will drive end-to-end design development, from concept to production, ensuring high-quality OEM-grade deliverables.

Job Requirements :

Job Summary:

We are seeking a Mechanical Design Engineer with hands-on experience in electromechanical product design such as solenoids, valves, and actuators, to join our dynamic team at Janatics Industrial Automation Pvt. Ltd. This role demands a high level of innovation, deep design knowledge, and comprehensive understanding of product manufacturing processes. The ideal candidate will drive end-to-end design development, from concept to production, ensuring high-quality OEM-grade deliverables.

Key Responsibilities:

• Lead the mechanical design of solenoids, valves, actuators, and electromechanical components from concept to final product.
• Create 3D models, detailed 2D drawings, and BOMs using SolidWorks adhering to ASME/ISO standards.
• Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure precision and fitment in assemblies.
• Conduct DFMEA, design validation, and tolerance stack-up analysis for robust product realization.
• Collaborate with electrical, electronics, and production teams for seamless integration of mechanical designs.
• Support prototype development, fixture design, and assembly tool conceptualization.
• Perform DFM/DFA analysis to ensure designs are optimized for manufacturability and assembly.
• Interact with suppliers and the internal procurement team to ensure component manufacturability.
• Coordinate with external agencies for product testing and certification (CE, UL, IP ratings, RoHS, etc.).
• Lead design reviews, documentation, and engineering change control processes.
• Stay updated on latest materials, manufacturing processes, and compliance standards relevant to electromechanical products.

Mandatory Skills & Competencies:

• Expertise in SolidWorks including surfacing, sheet metal, and advanced assembly modeling.
• Strong knowledge of GD&T as per ASME Y14.5.
• OEM-level design expertise and experience in mass production-oriented design.
• Working knowledge of plastic injection molding, die casting, CNC machining, brazing, overmolding, and press tools.
• Innovative mindset with a strong grasp of design thinking and product innovation methodologies.
• Hands-on experience in product lifecycle management (PLM) systems and change management.
• Understanding of certification standards: CE, UL, IP, RoHS, etc.
• Familiarity with CAE tools for thermal, structural, or fluid flow analysis (e.g., ANSYS, SolidWorks Simulation).
• Strong communication and technical documentation skills.

Preferred Attributes:

• Experience in fixture design for testing and assembly of precision components.
• Exposure to solenoid coil design integration, sealing, and encapsulation techniques.
• Hands-on involvement in life cycle testing, accelerated aging, vibration, and thermal validation.
• Capability to work in a fast-paced environment with multiple product development timelines.

Minimum Requirements :

B.E/B.Tech in Mechanical or any allied courses with 6 to 8 years of experience in electromechanical products

Number of Position : 2

Contact Person : Talent Acquisition Team

Phone : 9952890877

Job Location : Coimbatore (Malumichampatti)

Interview Date & Time : On Appointment (F2F only)

Apply